Chances are nearly any piece of unfinished wood furniture you purchase will come with some issues. Many times they’re going to have parts that stick or loose joints. They can also have knots in the wood, saw marks, and rough edges. It is best to bother to fix any issues with the furniture before you put on the varnish. The first chore when preparing your unfinished wood furniture is to make sure it is put together correctly. Rigorously look at all the joints to see if there are any weak areas. Somewhere they can regularly be found is on the drawers. Most unfinished wood f ittings is put together with stapes. When the staples are in correctly you should have no Problems. Occasionally they will need to be strengthened with finishing nails. To help in keeping the wood from splitting it is best to drill a pilot hole before putting the nail in. Re-glue any loose arms, rungs, or legs and check to see that drawers slide smoothly on their runners. Your next step ought to be to rigorously inspect the wood for sap. Cleaning any sap or resin which has toughened and clear out any knots and sap pockets using turpentine. If the knots are loose it is best to completely remove them and then glue them in place . Sand the pieces thoroughly to get rid of any coarse edges. Start with rough sandpaper and work your way to a fine grit. Fill in any low spots or gaps with putty or wood filler. Do not employ a planer as this may splinter the wood. Before you finish your unfinished furniture it must be thoroughly sealed. When wood is not sealed it can create issues as the timber expands and contracts with changes in warmth and moisture. Do not forget the seal the interior of drawers and other hidden parts of the piece to prevent warping and splitting.
Related posts:
